For most turned parts, we typically work to tolerances of ±0.01 mm to ±0.02 mm. For critical diameters, fits and other selected features, ±0.005 mm can be achieved depending on the material, part size and geometry. We review tight-tolerance features individually before production

Our turning capacity covers parts up to Ø900 mm in diameter. Maximum turning length depends on the part diameter, weight and required features, so for larger or longer components, we recommend sending us the drawing for a quick capability review

We regularly machine aluminum, stainless steel, carbon steel, alloy steel, brass, bronze and engineering plastics. Other materials can also be evaluated based on the drawing and application requirements.

Yes. For parts with flats, cross holes, slots or other milled features, we can use turn-mill machining to complete more features in fewer setups. This is particularly useful for complex shafts, fittings, valve components and other rotational parts

We can provide dimensional inspection reports, CMM reports and material certificates according to project requirements. Critical dimensions and GD&T features are checked against the approved drawing before shipment